Versions Compared

Version Old Version 2 New Version Current
Changes made by

Chris Long

Scott Nightingale

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Child pages (Children Display)
alldepthtrue
depth3

La Spazielle

  • Standard connection which does not require a cable adaptor

Nuova Simonelli / Victoria Arduino

...

3

Also see Flow meter cable variations

Manufacturer

Models

Notes

Nuova Simonelli

Appia II

Auralia

Auralia II

Auralia Digit

Victoria Arduino

White Eagle

Black Eagle

Eagle One

  • Black Eagle Gravimetric machines do not have a flow meter, so will not be compatible.

  • Pulse Jet is

...

  • pre-infusion and will need to be set manually by the tech team. 

La Marzocco

...

  • Standard Gicar, though alternate pin out adapter required. 

  • Modbar, FB70  and strada models use the ‘lug’ adaptor that Rancilio use. 

  • Strada does not have a service hole, so no way to feed the main cable out of the machine. Either non-compatible, or a hole needs to be drilled to accommodate the cable. 

  • Kb90 Barely has enough clearance for the main cable, plus the adaptor. It can fit through needs improvement from our end, primarily through a slimline version of the adaptor. 

San Remo

  • Standard connection which does not require a cable adaptor

  • Cafe Racer has four pole sensor

Rancilio 

  • Requires the Two terminal plus ground lug adaptor. 

Slayer

  • 4 pole flow sensor

  • Standard connection which does not require a cable adaptor

  • Four pole sensor will so will need confirmation data is accurate. 

Synesso

...

4 Pole Flow sensor. 

...

Linea Classic

GB5

Strada AV

Strada ABR

Linea PB

KB90

KB90 ABR

  • Strada services hole for routing flow cable can be exposed by removing back panel of machine. 

  • KB90 does not have enough clearance for standard GDS207 flow meter connectors. Use Flow KB90 cable with LM low profile connectors or Flow Quick Disconnect cable instead.

San Remo

F18

Cafe Racer

Zoe

  • All San Remo F18's, Cafe Racers, and Operas have 4 pole flow meters

  • F18’s have a soft pre-infusion cycle that will require pre-infusion detection enabled.

Slayer

EP

LP

  • Four pole flow meter

Synesso

MVP

MVP Hydra

  • Four pole flow meter

  • 'S' models internal components are Synesso standard as found in our MVP and MVP Hydra machines.

Unic

...

Standard connection though does require the alternate pinout adaptor. 

...

Stella Di Caffe

Mira

Classic

  • The group one and two flow meters are further apart than our cable split allows. Manually splitting cable is a short term fix, though refinement required. 

La Spaziale

S9

S50

La San Marco

DTC

Rancilio

Epoca

Classe 5

Classe 11

Modbar

EP

Ruggero

Steam Hammer

Wega

Polaris Tron

Faema

La Cimbali

...

Kees Vander

...

Western

??

Can be a bit of a stretch to get one Flow cable across both flow meters. Suggested workaround is to use 2 Flow cables, one for each flow meter

Image from iOS.MP4