Also see https://flowcoffee-co-nz.atlassian.net/wiki/spaces/FGCI/pages/594313243/Flow+meter+cable+variations

Nuova Simonelli / Victoria Arduino

• Black Eagle Gravimetric machines do not have a flow meter, so will not be compatible.

• Pulse Jet is pre-infusion and will need to be set manually by the tech team. 

La Marzocco

• Strada services hole for routing flow cable can be exposed by removing back panel of machine. 

• KB90 does not have enough clearance for standard GDS207 flow meter connectors. Use Flow KB90 cable with LM low profile connectors or Flow Quick Disconnect cable instead.

San Remo

• All San Remo F18's, Cafe Racers, and Operas have 4 pole flow meters

• F18’s have a soft pre-infusion cycle that will require pre-infusion detection enabled.

Slayer

• Four pole flow meter

Synesso

• Four pole flow meter

• 'S' models internal components are Synesso standard as found in our MVP and MVP Hydra machines.

Unic

• The group one and two flow meters are further apart than our cable split allows. Manually splitting cable is a short term fix, though refinement required.