...
Connect the Ethernet cable (from the sites network outlet or the Wi-Fi to Ethernet adapter) to the Flow Gateway.
Install the Flow Gateway power supply, secure the cable, and connect to the device.
Ensure that the power light on the front panel of the Flow Gateway is illuminated and that the Ethernet after a delay of approximately 20 seconds the status light (green light on the Ethernet jack) is illuminated.
Nb. It is normal for the connection (globe icon) globe icon) is illuminated green continuously (This indicates the device has established a connection to the cloud service)
...
Nb. If the status light on the front panel
...
is not illuminated, confirm on the back of the Flow Gateway that the network outlet green indicators are illuminated as follows:
Green indicator illuminated continuously
Amber indicator illuminated continuously or blinking
...
6. Confirm the Flow Gateway operation
...