...
An Ethernet or Wi-Fi network which is accessible from the location of the coffee machine
Outbound access from the Ethernet or Wi-Fi network to
a14v6cnrny0bel-ats.iot.ap-southeast-2.amazonaws.com on port 443 TCP (HTTP and MQTT over TLS)
At least one of the following addresses, on port 123 UDP (NTP):
0.asia.pool.ntp.org
0.europe.pool.ntp.org
0.id.pool.ntp.org
0.south-america.pool.ntp.org
0.oceania.pool.ntp.org
0.north-america.pool.ntp.org
A suitable mounting location for the Flow Gateway near the coffee machine (usually under the counter)
Nb. The supplied Flow meter cable is 3 meters long, so depending on the routing of the cable within the coffee machine, this allows for installing the Flow Gateway approximately 1.5-2 meters away from the coffee machineAC power outlet near the location of the coffee machine for the Flow Gateway power supply (usually under the counter)
Nb. The Flow Gateway power supply cable is 1 meter longIf the Flow Gateway will be connected via a Wi-Fi network:
A second AC power outlet near the location of the coffee machine for the Wi-Fi to Ethernet adapter
Nb. The TP-Link TL-WA850RE may not fit in a power outlet adjacent to another plug. It is 66mm wide, and extends 85mm above the centre of plug and 25mm below the centre of the plug.
...
Connect the Ethernet cable (from the sites network outlet or the Wi-Fi to Ethernet adapter) to the Flow Gateway.
Install the Flow Gateway power supply, secure the cable, and connect to the device.
Ensure that the power light on the front panel of the Flow Gateway is illuminated and that the Ethernet light (green light on the Ethernet jack) is illuminated.
Nb. It is normal for the connection (globe icon) light on the front panel not to be illuminated when using an Ethernet connection.
6. Confirm the Flow Gateway operation
...