Versions Compared

Version Old Version 3 New Version 4
Changes made by

Paul Mumby

Chris Long

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Disconnect the espresso machine’s plug connector from the flow meter terminals.

  2. Connect the female connector on the flow gateway cable to the flow meter terminals.Connect the corresponding male

  3. Reconnect the espresso machine’s plug connector on top of the flow new gateway cable to the coffee machine’s flow meter connectoras per the image below.

Unused connection

If there is a spare connector on the flow meter cable after all groupheads have been connected (ie. when two cables are used for a 3 group head espresso machine), leave the plastic sleeve on the cable connector and secure the cable out of the way.

...

  1. Download App ‘ESP BLE Provisioning’.

    Image Removed

    Image Added

    Google Play Store: https://play.google.com/store/apps/details?id=com.espressif.provble

    Apple App Store: https://apps.apple.com/us/app/esp-ble-provisioning/id1473590141

  2. Turn on the Flow gateway device.

  3. The screen is a touch screen. Slide your finger across the screen from right to left, until the screen shows ‘begin device provisioning’.

  4. Click on ‘Begin Device Provisioning’. A QR Code will appear on the screen.

  5. Open the ESP Provisioning App, click on Provision Device, and scan the QR Code on the Flow Gateway. Available connections will appear on the screen, and you need to click on the appropriate network you want to connect to.

  6. At this point, you will be asked for the password for the wifi network. Enter the password and click ‘provision’.

  7. you will see that the gateway is connected to the WiFi network when the device rolls back to the home screen and displays ‘Flow Cloud Online’ as per below.

...