...
Unscrew the cable entry grommet, so that the cable can move freely.
Pop the pinout insert out of the bottom of the connector by removing the centre screw and pressing down on the flange which surrounds the screw.
Rotate the pinout insert to the desired orientation and reinsert it into the connector housing, taking care not to crush any of the wires on the centre screw flange.
Tighten the cable entry grommet and reinsert the centre screw.
...
GDS 207 connector compatible with individual quick connect (blade) connectors
...
Two grouphead Flow meter cable, per two groupheads
Alternate pinout adapter, per two groupheads
...
Two quick connect (blade) connectors plus ground lug
...