Versions Compared

Version Old Version 30 New Version 31
Changes made by

Scott Nightingale

Dave Floyd

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

All Flow Gateway cables are two grouphead cables, so for a 2 grouphead machine one cable is required, and for a 3-4 grouphead machine two cables are required.

 

GDS 207 compatible, standard pinout

GDS 207 compatible, alternate pinout

Two 2.79x0.81mm quick disconnect & M4 ring terminal

GDS 207 compatible, standard pinout, low profile

2.54 pitch four pin headerThree 2.79x0.81mm quick disconnect

Applicable espresso machines

  • Nuova Simonelli

  • Victoria Arduino

  • Sanremo

  • Slayer

  • Synesso

  • Kees Vander Westen

  • Wega

  • Dalla Corte

  • La Spazielle

  • TBC: Appia

  • La Marzocco

    • Linea PB

    • GB5

    • KB90

  • Unic

  • Rancilio

  • La Marzocco

    • Modbar

    • FB70

    • Strada AV

    • GS3

    • Linea Classic

  • La Marzocco

    • KB90

    La Cimbali

  • FaemaSynesso

Flow Coffee product code

TGFMC-GDS207

  • TGFMC-GDS207

  • TGFMC-APA

TGFMC-2X081M4TGFMC-3X051

TGFMC-254PH

TGFMC-3X081

Flow Coffee colour code

Cable colour code: BLACK

Cable colour code: BLACK

Cable colour code: YELLOWCable colour code: BLUE

Cable colour code: WHITECable colour code: RED

Flow Coffee product description

Two grouphead Flow meter cable - GDS 207

  • Two grouphead Flow meter cable - GDS 207

  • Two grouphead Flow meter cable - Alternate pinout adapter

Two grouphead Flow meter cable - Two 2.79x0.81mm quick disconnect & M4 ring terminalThree 2.79x0.51mm quick disconnect

Two grouphead Flow meter cable - 2.54 pitch four pin header
Two grouphead Flow meter cable - Three 2.79x0.81mm quick disconnect

Flow Gateway cable images (Per two groupheads)

AND

Image RemovedImage Added

Image Removed

Image Removed

Flow meter example image

Image Removed

Image Removed

Flow meter pinout

 

Image Removed

 

Image Removed

Flow meter connection specification

Three 2.79x0.51mm pins in DIN 43650 form C 9.4mm configuration, signal on centre pin

Three 2.79x0.51mm pins in DIN 43650 form C 9.4mm configuration, ground on centre pin

Two 2.79x0.81mm pins, plus one M4 ring terminal (ground)

Three 2.79x0.51mm pins in DIN 43650 form C 9.4mm configuration, signal on centre pin

Single row 4 circuit 2.54 pitch pin header

Three 2.79x0.81mm pins in DIN 43650 form C 9.4mm configuration, signal on centre pin

Flow meter manufacturerGicar

Gicar

Gicar

Gicar

Gicar

Digmesa

Notes

 

 

 

 

These flow meters have the same pin configuration and pinout as the GDS 207 compatible standard pinout flow meters, but they are not compatible with the GDS 207 connector because the pin thickness is larger than what the GDS 207 connector is designed to accommodate.