...
Download App ‘ESP BLE Provisioning’.
Turn on the Flow gateway device.
The screen is a touch screen. Slide your finger across the screen from right to left, until the screen shows ‘begin device provisioning’.
Click on ‘Begin Device Provisioning’. A QR Code will appear on the screen.
Open the ESP Provisioning App, click on Provision Device, and scan the QR Code on the Flow Gateway. Available connections will appear on the screen, and you need to click on the appropriate network as set by McDonalds.
At this point, you will be asked for the password for the wifi network. Enter the password and click ‘provision’.
you will see that the gateway is connected to the WiFi network when the device rolls back to the home screen and displays ‘Flow Cloud Online’ as per below.
6. Confirm the Flow Gateway operation
Run each grouphead on the espresso machine, ensuring that the correct grouphead indicator number on the screen of the Flow Gateway illuminates green while the grouphead is running.
...
IT IS EXTREMELY IMPORTANT TO MAKE SURE YOU HAVE THE POWER PACK PLUGGED INTO THE FLOW DEVICE. The flow device has a battery back up which allows you to power up the device and configure it without plugging the power cord into the device. Obviously, if you do not plug the power pack in to the device, the battery will drain within a couple of hours and then power down. It is essential to check this before the completion of the installation.
7. Installation complete!
...